Mini Corodek

More Views

Mini Corodek

Availability: In stock

Mini Corodek has the same basic corrugated shape as Corodek, but has smaller ribs. Mini Corodek creates an elegant and architecturally pleasing look, with the practicality and strength of pre-finished steel. The versatility of Mini Corodek makes it ideal for external and internal cladding, eaves lining, curved walls, splashbacks, partitions and feature cladding.

Mini Corodek (0.42mm)



Downloads: Mini Corodek Data Sheet, Mini Corodek Brochure, Colorbond Chart

Additional Information

Cover Width 825mm
Rib Height 6mm
Application Walling, Soffit
Lengths Custom Cut. Normally Max 6m
Minimum Recommended Pitch No
Base Metal Thickness (BMT) 0.42mm
Mass (kg/m²) 4.2kg (0.42mm BMT)
Standard Finishes Available Colorbond, Zincalume. Perforated on request. (Surfmist Only)
Maximum Spans
Wall SpansSoffit Spans
BMT Internal Span End Span Internal Span End Span
0.42mm 900mm 600mm 600mm 600mm
Note: Spans listed above are MAXIMUM recommended spans - Paterson recommends smaller spans for increased durability and resistance to damage by traffic. Spans above are calculated for buildings up to 10m high, located in average suburban or industrial areas, in which full internal wind pressure cannot be developed (Terrain Category 3 from AS 1170 Part 2 - 1983; Maximum internal pressure co-efficient, +0.2) Information subject to change without notice.
Spring-Curving (Convex) No
Curving Details Mini Corodek can be spring-curved to a minimum radius of 1500mm. Pre-curving minimum radius is 150mm.
Roof Spans (Internal x End) No
Walls Spans (Internal x End) No