Metrib

More Views

Metrib

Availability: In stock

Metrib is a low rib, fluted profile ideal for walls, eaves and soffits. With a low and flat profile, Metrib can be used a replacement for fibre cement or plasterboard.

Metrib (0.42mm)

Description

Details

Downloads: Metrib Brochure, Colorbond Chart

Additional Information

Cover Width 850mm
Rib Height 4mm
Application Walling, Soffit
Lengths Custom Cut. Normally Max 5m
Minimum Recommended Pitch No
Base Metal Thickness (BMT) 0.42mm
Mass (kg/m²) 3.9kg (0.42mm BMT)
Standard Finishes Available Colorbond, Zincalume
Maximum Spans
Wall SpansSoffit Spans
BMT Internal Span End Span Internal Span End Span
0.42mm 1200mm 1200mm 600mm 600mm
Note: Spans listed above are MAXIMUM recommended spans - Paterson recommends smaller spans for increased durability and resistance to damage by traffic. Spans above are calculated for buildings up to 10m high, located in average suburban or industrial areas, in which full internal wind pressure cannot be developed (Terrain Category 3 from AS 1170 Part 2 - 1983; Maximum internal pressure co-efficient, +0.2) Information subject to change without notice.
Spring-Curving (Convex) No
Curving Details No
Roof Spans (Internal x End) No
Walls Spans (Internal x End) No